Dolphin DCI 1.2: FIPS 140-2 cert #1633

Dolphin DCI 1.2, from Doremi Labs, holds FIPS 140-2 certificate #1633 at overall level 3. The validation is historical: agencies may keep the module in existing systems but not buy it new. Below are its validation history, algorithm certificates and security policy, drawn from the NIST CMVP entry.

Certificate

Certificate number	1633
Standard	FIPS 140-2
Status	historical
Overall level	3
Module type	Hardware
Embodiment	Multi-chip embedded
Vendor	Doremi Labs · website
Hardware versions	DOLPHIN-DCI-1.2-A0, DOLPHIN-DCI-1.2-A1, DOLPHIN-DCI-1.2-C0 and DOLPHIN-DCI-1.2-C1
Firmware versions	2.0.8p, 21.03m-1 and 99.03f

Module description

Quoted from the NIST CMVP entry for this certificate.

The Dolphin DCI 1.2 is a PCI-card that provides a standard definition/high definition serial digital interface. This is a Doremi decoder hardware card that contains a JPEG-2000 decoder hardware and BNC serial digital interface connectors used in Doremi Digital Cinema Servers like the DCP-2000. The Dolphin DCI 1.2 utilizes a dual-link encoded serial digital interface for output of DCI compliant resolutions up to 2040x1080p24 (2K-film). It can also operate single link for lower resolution material (i.e. trailers, advertisement, etc.).

Approved algorithms (5)

Algorithm	CAVP certificates
AES	521, 532, 1252
HMAC	271, 731
RNG	326, 693, 696, 700
RSA	600, 601, 777
SHS	593, 1148

Other algorithms

RSA (key wrapping; key establishment methodology provides 112 bits of encryption strength); TRNGs; MD5; HMAC-MD5

Validation history

Date	Type	Lab
2011-11-10	Initial	AEGISOLVE, Inc.
2013-06-07	Update	AEGISOLVE, Inc.

Status timeline

As observed by this tracker's snapshots. NIST publishes no dates for list moves; observation began 2026-08-21, so earlier changes carry no date.

2026-08-21: first observed by this tracker, status historical
Validation dates on record: 2011-11-10, 2013-06-07

Dolphin DCI 1.2