HPE XP7 Encryption Ready Disk Adapter (eDKA)
HPE XP7 Encryption Ready Disk Adapter (eDKA), from Hewlett Packard®, Enterprise, holds FIPS 140-2 certificate #2760 at overall level 2. The validation is historical: agencies may keep the module in existing systems but not buy it new. Below are its validation history, algorithm certificates and security policy, drawn from the NIST CMVP entry.
Caveat: When installed, initialized and configured as specified in Section 8.1 and 8.2 of the Security Policy. The tamper evident seals installed as indicated in Section 1.1 of the Security Policy.
Certificate
| Certificate number | 2760 |
|---|---|
| Standard | FIPS 140-2 |
| Status | historical |
| Overall level | 2 |
| Module type | Hardware |
| Embodiment | Multi-Chip Embedded |
| Vendor | Hewlett Packard®, Enterprise · website |
| Hardware versions | P/N: eSCAS(WP820) or eSCAM(WP820) Version: B/A5, B/A6, B/A7, B/A8, B/A9 or B/A10 |
| Firmware versions | 02.09.28.00, 02.09.32.00 or 02.09.37.00 |
Module description
Quoted from the NIST CMVP entry for this certificate.
The HPE XP7 Encryption Ready Disk Adapter (eDKA) provides high speed data at rest encryption for HPE storage.
Security level exceptions
- Mitigation of Other Attacks: N/A
Approved algorithms (4)
Tested configurations
- N/A
Validation history
| Date | Type | Lab |
|---|---|---|
| 2016-09-27 | Initial | ECSEC Laboratory Inc. |
| 2017-08-01 | Update | ECSEC Laboratory Inc. |
| 2017-10-06 | Update | ECSEC Laboratory Inc. |
| 2019-10-01 | Update | ECSEC Laboratory Inc. |
| 2020-06-19 | Update | ECSEC Laboratory Inc. |
Status timeline
As observed by this tracker's snapshots. NIST publishes no dates for list moves; observation began 2026-08-21, so earlier changes carry no date.
- 2026-08-21: first observed by this tracker, status historical
- Validation dates on record: 2016-09-27, 2017-08-01, 2017-10-06, 2019-10-01, 2020-06-19