HPE Gen9 Smart Array P-Class RAID Controllers and HPE Gen9 Smart HBA H-Class Adapter
Caveat: When installed, initialized and configured as specified in the Security Policy Section 3
Certificate
| Certificate number | 3206 |
|---|---|
| Standard | FIPS 140-2 |
| Status | historical |
| Overall level | 1 |
| Module type | Hardware |
| Embodiment | Multi-Chip Embedded |
| Vendor | Hewlett Packard Enterprise Development LP · website |
| Hardware versions | P240nr, P440, P440ar, P542D, P840, H240nr |
| Firmware versions | 6.06 |
Module description
The HP P-Class Smart Array RAID Controllers make up a family of serial-attached SCSI host bus adapters that provide intelligent control for storage array. The controllers can be card-based or embedded within an HP server, and provide a high speed data path, on-board storage cache, remote management, and encryption of data at rest, for the controlled storage arrays.
Security level exceptions
- Roles, Services, and Authentication: Level 2
- Design Assurance: Level 2
- Mitigation of Other Attacks: N/A
Approved algorithms
| Algorithm | CAVP certificate |
|---|---|
| AES | 2902, 2903, 2904 |
| CKG | vendor affirmed |
| DRBG | 529, 530, 531 |
| HMAC | 1837, 1838, 1839 |
| PBKDF | vendor affirmed |
| SHS | 2442, 2443, 2444 |
Allowed algorithms
NDRNG
Tested configurations
- N/A
Validation history
| Date | Type | Lab |
|---|---|---|
| 2018-06-25 | Initial | EWA - Canada |
Status timeline
As observed by this tracker's snapshots. NIST publishes no dates for list moves; observation began 2026-08-21, so earlier changes carry no date.
- 2026-08-21: first observed by this tracker, status historical
- Validation dates on record: 2018-06-25