SXF1800
SXF1800, from NXP Semiconductors Netherlands B.V., holds FIPS 140-2 certificate #3691 at overall level 3. The validation is historical: agencies may keep the module in existing systems but not buy it new. Below are its validation history, algorithm certificates and security policy, drawn from the NIST CMVP entry.
Caveat: When operated in FIPS mode; When installed, initialized and configured as specified in Section 8 of the Security Policy
Certificate
| Certificate number | 3691 |
|---|---|
| Standard | FIPS 140-2 |
| Status | historical |
| Overall level | 3 |
| Module type | Hardware |
| Embodiment | Single Chip |
| Vendor | NXP Semiconductors Netherlands B.V. · website |
| Hardware versions | P/N SXF1800HN/V102B |
| Firmware versions | JCOP 4.4 R1.16.8; V2X applet V2.12.3; GS applet v2.12.1 |
Module description
Quoted from the NIST CMVP entry for this certificate.
The NXP RoadLINK SXF1800 Secure Element is supporting tamper resistant cryptographic functionality as required by V2X standards and applications. The SXF1800 is designed for configurable support for North American and European V2X standards defined to protect the integrity of exchanged safety messages and to enable authentication of V2X participants.
Security level exceptions
- Physical Security: Level 4
Approved algorithms (8)
| Algorithm | CAVP certificates |
|---|---|
| AES | C872, C875 |
| CKG | vendor affirmed |
| CVL | C871 |
| DRBG | C875 |
| ECDSA | C875 |
| KBKDF | C878 |
| KTS | |
| SHS | C875 |
Allowed algorithms
EC Diffie-Hellman (key agreement); NDRNG
Tested configurations
- N/A
Validation history
| Date | Type | Lab |
|---|---|---|
| 2020-07-28 | Initial | UL Verification Services, Inc. |
Status timeline
As observed by this tracker's snapshots. NIST publishes no dates for list moves; observation began 2026-08-21, so earlier changes carry no date.
- 2026-08-21: first observed by this tracker, status historical
- Validation dates on record: 2020-07-28