DL4FE
Caveat: This module contains the embedded module JCOP 3 SecID P60 CS (OSB) validated to FIPS 140-2 under Cert. #3175 operating in FIPS mode
Certificate
| Certificate number | 3972 |
|---|---|
| Standard | FIPS 140-2 |
| Status | historical |
| Overall level | 3 |
| Module type | Hardware |
| Embodiment | Multi-Chip Stand Alone |
| Vendor | DataLocker Inc. · website |
| Hardware versions | DL4-500GB-FE, DL4-1TB-FE, DL4-2TB-FE, DL4-SSD-500GB-FE, DL4-SSD-1TB-FE, DL4-SSD-2TB-FE, DL4-SSD-4TB-FE, DL4-SSD-7.6TB-FE, DL4-SSD-16TB-FE |
| Firmware versions | Firmware Versions 1.49 and 2.11 with Bootloader Version 1.12 |
Module description
The DL4FE is an encrypted portable storage device, featuring three crypto processors, which provide layers of cryptographic protection. It requires no additional software or drivers to be installed on the host PC. It is intended for use by US Federal agencies or other markets that require FIPS 140-2 validated encrypted storage.
Security level exceptions
- Mitigation of Other Attacks: N/A
Approved algorithms
| Algorithm | CAVP certificate |
|---|---|
| AES | 3971, 5695 |
| CKG | vendor affirmed |
| DRBG | 1187 |
| ECDSA | 890 |
| HMAC | 2589 |
| KAS-SSC | vendor affirmed |
| KDA | vendor affirmed |
| PBKDF | vendor affirmed |
| SHS | 3275, 3299, 4565 |
Allowed algorithms
NDRNG
Tested configurations
- N/A
Validation history
| Date | Type | Lab |
|---|---|---|
| 2021-07-07 | Initial | Penumbra Security, Inc. |
| 2022-02-25 | Update | Penumbra Security, Inc. |
Status timeline
As observed by this tracker's snapshots. NIST publishes no dates for list moves; observation began 2026-08-21, so earlier changes carry no date.
- 2026-08-21: first observed by this tracker, status historical
- Validation dates on record: 2021-07-07, 2022-02-25