808bits

CN Series Encryptors

FIPS 140-2 certificate #4208 · Senetas Corporation Ltd., distributed by Thales SA (SafeNet) · data as of 2026-10-09

CN Series Encryptors, from Senetas Corporation Ltd., distributed by Thales SA (SafeNet), holds FIPS 140-2 certificate #4208 at overall level 3. The validation is historical: agencies may keep the module in existing systems but not buy it new. Below are its algorithm certificates, its validation history, and the list moves this tracker has observed, which NIST does not date.

Historical. Moved to historical list due to sunsetting. Federal agencies may reference historical validations for existing systems only, not for new procurement. Observed moving to historical on 2026-09-22. It was one of the last FIPS 140-2 certificates, all moved at the 140-2 sunset on 2026-09-21.
Caveat: When operated in FIPS mode

Certificate

Certificate number4208
StandardFIPS 140-2
Statushistorical
Overall level3
Module typeHardware
EmbodimentMulti-Chip Stand Alone
VendorSenetas Corporation Ltd., distributed by Thales SA (SafeNet) · website
Hardware versionsSenetas Corp. Ltd. CN4000 Series: A4010B (DC) and A4020B (DC); Senetas Corp. Ltd. CN6000 Series: A6010B (AC), A6011B (DC), A6012B (AC/DC), A6140B (AC), A6141B (DC) and A6142B (AC/DC); Senetas Corp. Ltd. CN9000 Series: A9100B (AC), A9101B (DC), A9102B (AC/DC), A9120B (AC), A9121B (DC) and A9122B (AC/DC); Senetas Corp. Ltd. & SafeNet Inc. CN4000 Series: A4010B (DC) and A4020B (DC); Senetas Corp. Ltd. & SafeNet Inc. CN6000 Series: A6010B (AC), A6011B (DC), A6012B (AC/DC), A6140B (AC), A6141B (DC) and A6142B (AC/DC); Senetas Corp. Ltd. & SafeNet Inc. CN9000 Series: A9100B (AC), A9101B (DC), A9102B (AC/DC), A9120B (AC), A9121B (DC) and A9122B (AC/DC); Senetas Corp. Ltd. & Thales CN4000 Series: A4010B (DC) and A4020B (DC); Senetas Corp. Ltd. & Thales CN6000 Series: A6010B (AC), A6011B (DC), A6012B (AC/DC), A6140B (AC), A6141B (DC) and A6142B (AC/DC); Senetas Corp. Ltd. & Thales CN9000 Series: A9100B (AC), A9101B (DC), A9102B (AC/DC), A9120B (AC), A9121B (DC) and A9122B (AC/DC)
Firmware versions5.2.0 and 5.2.1

Module description

Quoted from the NIST CMVP entry for this certificate.

The CN4010, CN4020, CN6010, CN6140, CN9100 and CN9120 are high-speed hardware encryption platforms that secure data over twisted-pair and optical Ethernet networks. The modules support line rates from 10Mb/s to 100Gb/s. All models except CN4010 are equipped with pluggable transceivers to support a variety of optical network interfaces. Data privacy is provided by FIPS approved AES algorithms in CFB, CTR and GCM modes. Additional transmission security is provided via TRANSEC (Traffic Flow Security) which can be used to remove patterns in network traffic and prevent traffic analysis attacks.

Approved algorithms (14)

AlgorithmCAVP certificates
AESA1570, A1571, A1572, A1573, A1574, A1575, A1576, A1577, A1578, A1579, A1580, A1581, A1584, A1618
CKGvendor affirmed
CVLA1584
DRBGA1584
ECDSAA1584
ENT
HMACA1584, A1632
KASA1584
KBKDFA1584
KTS
KTS-RSA
RSAA1584
SHSA1584, A1632
Triple-DESA1584

Tested configurations

  • N/A

Validation history

DateTypeLab
2022-04-29InitialLightship Security, Inc.
2022-07-19UpdateLightship Security, Inc.

Status timeline

As observed by this tracker's snapshots. NIST publishes no dates for list moves; observation began 2026-08-21, so earlier changes carry no date.

  • 2026-08-21: first observed by this tracker, status historical at the time of the earliest snapshot
  • 2026-09-22: observed moving from active to historical
  • Validation dates on record: 2022-04-29, 2022-07-19

Source documents