808bits

Juniper Networks MX240, MX480, MX960 3D Universal Edge Routers with RE-S-X6-128G/RE-1800 Routing Engine and MPC7E-10G MACSec Card

FIPS 140-2 certificate #4503 · Juniper Networks, Inc. · data as of 2026-08-28
Active. Sunset date 2026-09-21, 23 days away. This is the FIPS 140-2 sunset: after it, agencies may keep the module only in existing systems.
Caveat: When operated in FIPS mode, installed, initialized and configured as specified in Section 1.2 and 6 of the Security Policy

Certificate

Certificate number4503
StandardFIPS 140-2
Statusactive
Sunset date2026-09-21
Overall level1
Module typeHardware
EmbodimentMulti-Chip Stand Alone
VendorJuniper Networks, Inc. · website
Hardware versionsMX240, MX480, MX960 with components identified in Security Policy Table 1
Firmware versionsJunos OS 20.3X75

Module description

Juniper Networks MX Series is a robust portfolio of SDN enabled routing and switching platforms that provide industry leading system capacity,density,security and performance. MPC7E-10G supports 40 ports of 10gbps with GCM-AES-256 MACSEC encryption.

Security level exceptions

  • Roles, Services, and Authentication: Level 3
  • Design Assurance: Level 3
  • Mitigation of Other Attacks: N/A

Approved algorithms

AlgorithmCAVP certificate
AES3969, A2285, A2286, A2287
CVLA2286
DRBGA2283, A2286, A2287
ECDSAA2286
ENT
HMACA2283, A2284, A2286, A2287
KAS
KAS-SSCA2286
KBKDFA2285
KTS
KTS
RSAA2286
SHSA2283, A2284, A2286, A2287

Tested configurations

  • N/A

Validation history

DateTypeLab
2023-05-03InitialAcumen Security

Status timeline

As observed by this tracker's snapshots. NIST publishes no dates for list moves; observation began 2026-08-21, so earlier changes carry no date.

  • 2026-08-21: first observed by this tracker, status active
  • Validation dates on record: 2023-05-03

Source documents